Home   |   

Technological Innovation

High-Strength Composite Trench Cover

High-Strength Composite Trench Cover
The composite cable trench cover is a composite material board for construction, which is formed by high-temperature molding of polymer composite materials, and has the characteristics of natural anti-theft because it has no secondary use-value.
1. beautiful appearance: simple lines, silver appearance, modern trend.
2. quite a good drainage: the leakage area is 83.3%, more than twice as much as cast iron.
3. hot-dip galvanizing: strong anti-rust, maintenance-free and replacement.
4. anti-theft design: cover and frame with hinge connection, anti-theft, security, easy to open.
5. saving investment: large span, heavy load, lower than cast iron price and save the cost of stolen or crushed replacement.
6. high load (50KN-900KN): strength and toughness are much higher than cast iron, can be used in docks, airports and other large spans and heavy load environments.
7. A variety of specifications: to meet the needs of different environments, loads, spans, sizes and shapes.

Composite trench cover
The product has the advantages of simple construction, lightweight, good load-bearing capacity, good impact resistance, no bending, no large amount of displacement, beautiful and durable after hot-dip galvanizing treatment, anti-corrosion, and a cast iron cover plate. It is easy to open with a hinge joint or hook connection and has an anti-theft function.
What should you pay attention to when constructing a cable trench cover? Cable trench construction should pay attention to safety performance, but also pay attention to the beautiful effect. Therefore, in the construction of the project, we must pay special attention to some technical points, so that the project can be done well. Now Zibo Best Energy-Saving Materials Co., Ltd. tells everyone The four points of the cable trench cover construction technology if you are a construction worker must look carefully, I think it will help you.
What should you pay attention to when constructing a trench cover?
1. Make drawings in advance and strictly follow the operation of the drawings. The plane position, elevation and flow direction of the side ditch should pay attention to the requirements.
2. When the trench body formwork is removed, it should be carried out gently to avoid damage to the edges and corners of the side ditch. After the formwork is removed, cover it with felt cloth or geotextile in time.
3. When installing the side ditch cover, the mortar should be flat on the top of the concrete side ditch. When the pavement layer is laid, the top surface of the cover should be firstly brushed. After the construction is completed, the cover should be covered in time to maintain the concrete strength. After that, let go.
4. When the cable trench cover is constructed, the cast-in-place concrete side ditch should be evenly vibrated when it is poured, and it should not be vibrated in the same position for a long time. Also, pay attention to clean and rinse the concrete leaking on the road surface.

Contact us

Contact: Elaine Yang

Whatsapp: +8613793332897

Email: sales04@coverchina.net

Add: No125 Liuquan Road Gaoxin District Zibo City,Shandong Province,China

Scanning Two-Dimensional Code with Mobile Phone关闭
QR code